Correction to: Psoriasis in systemic lupus erythematosus: a single-center experience

In pipe flow analysis, problems are typically categorized into three types — Type I, Type II, and Type III — based on the known parameters and the desired outcome. Each type of problem addresses specific engineering requirements using fluid properties, pipe characteristics, and operational conditions.
In a Type I problem, fluid properties (density and viscosity), pipe characteristics (including diameter, length, and surface roughness), and the flow rate or average velocity are...

The structure of a crystalline solid, whether a metal or not, is best described by considering its simplest repeating unit, which is referred to as its unit cell. The unit cell consists of lattice points that represent the locations of atoms or ions. The entire structure then consists of this unit cell repeating in three dimensions. The three different types of unit cells present in the cubic lattice are illustrated in Figure 1.
Types of Unit Cells
Imagine taking a large number of identical...

To achieve precise distance measurements, especially in surveying and construction, certain corrections must be applied to account for potential sources of error like the standardization errors, temperature variations, and slope adjustments.Standardization error emerges when measurement equipment undergoes changes, such as wear, repairs, or weather impacts. To address this, surveyors compare the equipment’s readings to a standard. This process identifies any deviation that might lead to...

The power transmission to a factory involves the transfer of apparent power, a combination of active and reactive power. The power factor measures how effectively electrical power is converted into useful work output. The ratio of the real power (KW) that does the work to the apparent power (KVA) supplied to the circuit.

The center of gravity (COG) of an object is the point where the object's total weight is considered to be concentrated. Knowing the location of the center of gravity is useful when predicting the behavior of a moving object or designing static structures. In a uniform gravitational field, the center of gravity is similar to the center of mass (COM); yet, these two points can be positioned differently. For example, the Moon's center of mass lies very close to its geometric center, but...

The center of gravity is the point at which an object's weight appears to be concentrated and can be used to balance the object perfectly. This point is essential in mechanics as it provides information regarding a body's stability and moments of inertia. The center of gravity does not always have to fall within the shape or boundaries of the body; it may also lie outside the body in certain cases.
To determine its location, the principle of moments can be utilized by dividing the object into...