Related Experiment Video
Updated: Feb 2, 2026

RGB and Spectral Root Imaging for Plant Phenotyping and Physiological Research: Experimental Setup and Imaging Protocols
Published on: August 8, 2017
Image analysis procedure for the optical scanning of fine-root dynamics: errors depending on the observer and
Tomonori Kume1,2, Mizue Ohashi3, Naoki Makita4
1Kasuya Research Forest, Kyushu University, 394 Tsubakuro, Sasaguri, Fukuoka, Japan.
Abstract:
Clarifying the dynamics of fine roots is critical to understanding carbon and nutrient cycling in forest ecosystems. An optical scanner can potentially be used in studying fine-root dynamics in forest ecosystems. The present study examined image analysis procedures suitable for an optical scanner having a large (210 mm × 297 mm) root-viewing window. We proposed a protocol for analyzing whole soil images obtained by an optical scanner that cover depths of 0-210 mm. We tested our protocol using six observers with different experience in studying roots. The observers obtained data from the manual digitization of sequential soil images recorded for a Bornean tropical forest according to the protocol. Additionally, the study examined the potential tradeoff between the soil image size and accuracy of estimates of fine-root dynamics in a simple exercise. The six observers learned the protocol and obtained similar temporal patterns of fine-root growth and biomass with error of 10-20% regardless of their experience. However, there were large errors in decomposition owing to the low visibility of decomposed fine roots. The simple exercise revealed that a smaller root-viewing window (smaller than 60% of the original window) produces patterns of fine-root dynamics that are different from those for the original window size. The study showed the high applicability of our image analysis approach for whole soil images taken by optical scanners in estimating the fine-root dynamics of forest ecosystems.
Related Concept Videos
Primary and Secondary Growth in Roots and Shoots
Root Mean Square
For example, consider the velocity of gas molecules in a container. The gas molecules are moving in different directions, which might impart positive and negative...
Properties of the Root Locus
To determine if a point lies on the root locus, the criterion involves the sum of angles contributed by all poles and zeros to that point. Specifically, this sum must be an odd multiple of 180 degrees. The gain at any point on...
Root-Locus Method
This system can be represented by a block...
Construction of Root Locus
For positive gain values, the root locus exists on the real axis to the left of an odd number of finite open-loop poles or zeros. The root locus starts at the open-loop poles and traces the paths of the closed-loop poles as the gain...
Plotting and Calibrating the Root Locus
The maximum gain occurs at the breakaway points between open-loop poles on the real axis, while the minimum gain is...

