[Standardization of Analysis Conditions and Prediction of Increase Prediction Using Blood Flow Analysis Software for...

In recent years, reports have been made that predict the state of aneurysm by performing computational fluid dynamics (CFD) analysis using cerebral aneurysm blood flow analysis software. However, analysis results are not constant and there are various opinions, and it is conceivable that the image quality and analysis conditions of medical images used for CFD analysis are not standardized. In this study, CFD analysis of cerebral aneurysm phantom was performed, and image quality and analysis conditions were standardized. Then, we investigated whether increase of cerebral aneurysm and prediction of rupture are possible. From this study, stable results of wall shear stress analysis were obtained under slice thickness 1.0 mm or less, CT value 400 HU or more, reconstruction function as soft part function, image SD under 10 HU. In addition, as the size of the cerebral aneurysm became larger, wall shear stress tended to be lower, and the same tendency was shown also in clinical cases. Although CFD analysis using software dedicated to blood flow analysis did not reach the prediction of rupture, it can be evaluated based on the quantitative values for the aneurysm increase at the preceding stage and plays an important role in prediction there is a possibility.