Related Experiment Video

Updated: Feb 2, 2026

Additive Manufacturing-Enabled Low-Cost Particle Detector
06:05

Additive Manufacturing-Enabled Low-Cost Particle Detector

Published on: March 24, 2023

2.4K

Compact high-performance adiabatic 3-dB coupler enabled by subwavelength grating slot in the silicon-on-insulator

Luhua Xu, Yun Wang, Amar Kumar

    Optics Express
    |November 25, 2018
    PubMed

    More Related Videos

    A Random-displacement Measurement by Combining a Magnetic Scale and Two Fiber Bragg Gratings08:23

    A Random-displacement Measurement by Combining a Magnetic Scale and Two Fiber Bragg Gratings

    Published on: September 30, 2019

    6.7K
    A High-performance Compact Photoacoustic Tomography System for In Vivo Small-animal Brain Imaging05:32

    A High-performance Compact Photoacoustic Tomography System for In Vivo Small-animal Brain Imaging

    Published on: June 21, 2017

    11.0K

    Related Concept Videos

    Conductors and Insulators01:19

    Conductors and Insulators

    Some materials may easily let electrical charges pass through them, while others obstruct their flow. The former are called conductors and the latter insulators. The atomic structures of materials determine whether they are conductors or insulators of electricity.
    Most metals are conductors. Their atomic configuration is such that one or more electron(s) are loosely bound to the nucleus in each atom. Thus, a sea of mobile electrons are available in them, known as free electrons. Their easy...
    10.8K
    Compact Bone01:27

    Compact Bone

    Most bones contain compact and spongy osseous tissue, but their distribution and concentration vary based on the bone's overall function.
    Compact bone, also called cortical bone, is the denser, stronger of the two types of bone tissue. It is found under the periosteum and in the diaphyses of long bones, where it provides support and protection. The microscopic structural unit of compact bone is called an osteon, or haversian system. Each osteon is composed of concentric rings of calcified...
    16.5K
    Insulation Coordination01:23

    Insulation Coordination

    Insulation coordination is the process of matching electric equipment's insulation strength with protective device characteristics to protect the equipment against expected overvoltages. This selection is based on engineering judgment and cost. Equipment can generally withstand short-duration high transient overvoltages, but repeated tests with identical waveforms can yield inconsistent results. As a result, standard impulse voltage waveforms are used for testing, defined by specific times...
    571
    Work Done in an Adiabatic Process01:20

    Work Done in an Adiabatic Process

    Consider the adiabatic compression of an ideal gas in the cylinder of an automobile diesel engine. The gasoline vapor is injected into the cylinder of an automobile engine when the piston is in its expanded position. The temperature, pressure, and volume of the resulting gas-air mixture are 20 °C, 1.00 x 105 N/m2, and 240 cm3 , respectively. The mixture is then compressed adiabatically to a volume of 40 cm3. Note that, in the actual operation of an automobile engine, the compression is not...
    4.2K
    Compacting Factor test01:22

    Compacting Factor test

    The compacting factor test is a method used to assess the workability of concrete. It is  especially suitable for concrete mixes containing aggregates up to one and a half inches in size. This test involves specialized equipment consisting of two truncated cone-shaped hoppers and a cylinder, all with polished interior surfaces to minimize friction.
    The procedure begins by placing concrete into the upper hopper without any compaction. Once filled, the bottom door of this hopper is opened,...
    580
    Thermal Insulation in Masonry Walls01:22

    Thermal Insulation in Masonry Walls

    In hot, dry climates, the thermal mass of masonry walls can be beneficial, absorbing heat during the day and releasing it at night, thereby stabilizing indoor temperatures. However, in most other climates, additional insulation is necessary to enhance thermal resistance.
    External insulation can be applied using an Exterior Insulation and Finish System (EIFS), which involves affixing panels of plastic foam to the wall and covering them with a polymeric stucco reinforced with glass fiber mesh....
    554