Effect of Defects on Diffusion Behaviors of Lithium-Ion Battery Electrodes: In Situ Optical Observation and...

Lithium-ion batteries (LIBs) with high energy efficiency are urgently needed in various fields. For the LIBs electrodes, defects would be generated during the manufacturing processes and mechanical degradation and significantly impact the stability and performance of the LIBs. However, the effects of electrode defects on the electrochemical processes are still not clear. Herein, an in situ optical observation system is developed for monitoring the Li diffusion around the preintroduced defects in the commercial graphite electrodes. The experiments show that the gas-filled defects vertical to the direction of the Li diffusion would obviously decelerate the Li diffusion, whereas the electrolyte-filled defects parallel to the direction of the Li diffusion would accelerate the Li diffusion. In addition, finite element analysis (FEA) suggests, consistent with the experiments, a nonuniform distribution of local Li concentration around the defect. The equivalent diffusivity obtained by the FEA is also dependent on the configuration of the defects. The diffusivities of the electrolyte-filled parallel defect and gas-filled vertical defect are 12.6 and 11.0%, respectively. For the gas-filled defects, the size-effect calculation manifests that the equivalent diffusivity would decrease with the enlarged defect size, and the shape of the defects would substantially impact the decrease rate. The results directly reveal the mechanisms of the defect-induced diffusion behavior change in the electrodes by the new equivalent two-dimensional experiments, and the equivalent diffusivity would be useful for optimizing the electrode designs in LIBs.