Studies on CWL with glycerol for combustion process

Findings of more efficient energy recovery methods are focused on composite fuels consisting of coal, water, and waste materials. The use of such slurry fuels has enormous environmental benefits due to the potential for waste utilization and low emissions of harmful oxides to the atmosphere during the combustion process. In this study, we report the effect of waste glycerol on the rheological properties of coal-water fuel (CWS). The addition of glycerol to CWS increases the viscosity (from 45.5 to 184.2 mPa·s at a shear rate of 100 rpm) and density (from 1.08 to 1.11 g/cm³) of these suspensions. The utility of choice of the most favorable parameters is equal to 0.85 for both CWS and CWS with added glycerol. Due to the fact that CWS is dosed to heated chamber, its modification with glycerol results in easier nebulization into the combustion chamber, lowering of the solidification temperature and increasing the calorific value of the resulting fuel. During combustion of CWS with glycerol, the amount of SO₂ and NO_x emitted is reduced by half as compared to the emission of these gases during hard coal combustion.