Graphene used as a lateral force microscopy calibration material in the low-load non-linear regime

A lateral force microscopy (LFM) calibration technique utilizing a random low-profile surface is proposed that is successfully employed in the low-load non-linear frictional regime using a single layer of graphene on a supporting oxide substrate. This calibration at low loads and on low friction surfaces like graphene has the benefit of helping to limit the wear of the LFM tip during the calibration procedure. Moreover, the low-profiles of the calibration surface characteristic of these layered 2D materials, on standard polished oxide substrates, result in a nearly constant frictional, adhesive, and elastic response as the tip slides over the surface, making the determination of the calibration coefficient robust. Through a detailed calibration analysis that takes into account non-linear frictional response, it is found that the adhesion is best described by a nearly constant vertical orientation, rather than the more commonly encountered normally directed adhesion, as the single asperity passes over the low-profile graphene-coated oxide surface.