Physical-mechanical characterization of two amazon woods coming from the second cutting cycle

Due to changes in the Amazon forest dynamics after the first cutting cycle, non exploited species become dominant in the forest. The lack of technological knowledge makes it hard to commercialize these woods, making the understanding of their physical-mechanical properties a fundamental step to properly define their applications. This study aimed to characterize physically and mechanically the wood of Pseudopiptadenia psilostachya and Eschweilera ovata from the second cutting cycle of the Tapajós National Forest, intending to commercially promote and to identify usages for them, as well as to evaluate the viability of replacement of highly commercialized species. The tests were performed accordingly to the Brazilian standard NBR 7190. P. psilostachya, presented bulk density of 0.683 g.cm-3, medium levels of shrinkage and anisotropy, as well as medium hardness (7366 N) and high strength on compression parallel to grain (71.63 MPa) and on static bending (103.9 MPa). It was generally superior to Euxylophora paraensis, but inferior when compared to Bagasssa guianensis and Apuleia leiocarpa, with possibilities to replace these three species. E. ovata, on the other hand, presented bulk density of 0.798 g.cm-3, high shrinkage and anisotropy values, but high values for hardness (12089 N) and strength on compression parallel to grain (68.67 MPa) and on static bending (127.1 MPa). This species exhibited, in general, similarities with Mezilaurus itauba, although it is a little inferior in relation to Hymenaea sp. and Astronium lecointei. Both species, P. psilostachya and E. ovata fit in the highest strength class described on the Brazilian Standard NBR7190, C60. By means of the results found, it was concluded that although the species studied were unknown, they presented timber with enough quality to replace some Amazon timber species widely commercialized on both national and international market.