Extraction of p-n junction properties and series resistance in GaAs nanowire-based solar cells using light

Dmitry Mikulik1, Mikhail Mintairov2, Ian Nachemson1

  • 1Laboratory of Semiconductor Materials, Institute of Materials, École Polytechnique Fédérale de Lausanne, Lausanne 1015, Switzerland.

Nanotechnology
|December 8, 2018
PubMed

Related Concept Videos

Properties of Fourier series I01:20

Properties of Fourier series I

The Fourier series is a powerful tool in signal processing and communications, allowing periodic signals to be expressed as sums of sine and cosine functions. A foundational property of the Fourier series is linearity. If we consider two periodic signals, their linear combination results in a new signal whose Fourier coefficients are simply the corresponding linear combinations of the original signals' coefficients. This property is crucial in applications like frequency modulation (FM) radio,...
753
Properties of Fourier series II01:21

Properties of Fourier series II

Time scaling of signals is a crucial concept in signal processing that affects the Fourier series representation without altering its coefficients. The process modifies the fundamental frequency, thereby changing how the series represents the signal over time. This principle is essential in various applications, including audio and image processing, where signal manipulation is frequent. Understanding function symmetries is fundamental to simplifying the Fourier series.
A function f(t) is...
569
Concentration Cells02:41

Concentration Cells

A concentration cell is a type of a  voltaic cell constructed by connecting two almost identical half-cells, both based on the same half-reaction and using the same electrode, differing only in the concentration of one redox species. A concentration cell's potential, therefore, is determined only by the concentration difference of the particular redox species.
Consider the following voltaic cell:
25.9K
Overview of Cell-Cell Junctions01:14

Overview of Cell-Cell Junctions

The complex three-dimensional arrangement of cells in any multicellular organism is defined and maintained by interactions of cells with each other and the extracellular matrix. Cell-cell junctions are specialized structures where the multi-protein complexes on one cell interact with the multi-protein complexes on another  cell. These cell junctions are classified  into three main types based on their function — occluding, anchoring, and gap junctions.
Occluding or Tight...
29.8K
P-N junction01:11

P-N junction

A p-n junction is formed when p-type and n-type semiconductor materials are joined together. At the interface of the p-n junction, holes from the p-side and electrons from the n-side begin to diffuse into the opposite sides due to the concentration gradient. This diffusion of carriers leads to a region around the junction where there are no free charge carriers, known as the depletion region. The charge density within the depletion region for the n-side and p-side can be described by the...
1.2K
Resistors In Series01:10

Resistors In Series

A resistor is an ohmic device that limits the flow of charge in a circuit. Most circuits have more than one resistor. If several resistors are connected together and connected to a battery, the current supplied by the battery depends on the equivalent resistance of the circuit. The equivalent resistance of a combination of resistors depends on both their individual values and how they are connected. The simplest combination of resistors is the series combination. 
In a series circuit, the...
6.4K