Propulsive Power in Cross-Country Skiing: Application and Limitations of a Novel Wearable Sensor-Based Method During...

Cross-country skiing is an endurance sport that requires extremely high maximal aerobic power. Due to downhill sections where the athletes can recover, skiers must also have the ability to perform repeated efforts where metabolic power substantially exceeds maximal aerobic power. Since the duration of these supra-aerobic efforts is often in the order of seconds, heart rate, and pulmonary VO₂ do not adequately reflect instantaneous metabolic power. Propulsive power (P _prop) is an alternative parameter that can be used to estimate metabolic power, but the validity of such calculations during cross-country skiing has rarely been addressed. The aim of this study was therefore twofold: to develop a procedure using small non-intrusive sensors attached to the athlete for estimating P _prop during roller-skiing and to evaluate its limits; and (2) to utilize this procedure to determine the P _prop generated by high-level skiers during a simulated distance race. Eight elite male cross-country skiers simulated a 15 km individual distance race on roller skis using ski skating techniques on a course (13.5 km) similar to World Cup skiing courses. P _prop was calculated using a combination of standalone and differential GNSS measurements and inertial measurement units. The method's measurement error was assessed using a Monte Carlo simulation, sampling from the most relevant sources of error. P _prop decreased approximately linearly with skiing speed and acceleration, and was approximated by the equation $$ ) = -0.54·v -0.71 $$ + 7.26 W·kg^-1. P _prop was typically zero for skiing speeds >9 m·s^-1, because the athletes transitioned to the tuck position. Peak P _prop was 8.35 ± 0.63 W·kg^-1 and was typically attained during the final lap in the last major ascent, while average P _prop throughout the race was 3.35 ± 0.23 W·kg^-1. The measurement error of P _prop increased with skiing speed, from 0.09 W·kg^-1 at 2.0 m·s^-1 to 0.58 W·kg^-1 at 9.0 m·s^-1. In summary, this study is the first to provide continuous measurements of P _prop for distance skiing, as well as the first to quantify the measurement error during roller skiing using the power balance principle. Therefore, these results provide novel insight into the pacing strategies employed by high-level skiers.