Reduced-order observer based fault estimation and fault-tolerant control for switched stochastic systems with
Jian Han1, Xiuhua Liu1, Xinjiang Wei1
1School of Mathematics and Statistics Science, Ludong University, Yantai 264025, China.
Abstract:
This paper addresses the problems of fault estimation and fault-tolerant control for a class of switched stochastic systems with sensor and actuator faults. A reduced-order fault estimation observer is designed to estimate the system states, actuator and sensor faults, simultaneously. In the observer design process, intermediate variables are introduced such that the differential information of the measurement output is not included in the designed observer. Compared with the existing results, the dimension of the proposed observer is reduced, and the sensor fault can be completely unknown and unbounded. An observer based fault-tolerant controller is designed to stabilize the switched stochastic systems. Under arbitrary switching signal, the designed observer and controller can ensure that both the estimation error system and the closed-loop system are mean-square exponentially stable with disturbance attenuation performance. At last, both a numerical example and a switched electrical circuit example verify the proposed method.
Related Concept Videos
Fault Types
For line-to-line faults occurring between phases B and C, the...
Control Systems
At the heart...
Control Systems: Applications
In modern vehicles, control systems manage various functions to enhance performance and safety. The steering wheel and accelerator are primary inputs in a car's control system. The...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
Transfer Function in Control Systems
To derive the transfer function, consider a general nth-order linear time-invariant...


