Development and commissioning of a full-size prototype fixed-beam radiotherapy system with horizontal patient

Paul Zhi Yuan Liu1, Ricky O'Brien1, Soo-Min Heng2

  • 1ACRF Image X Institute, University of Sydney Central Clinical School, Sydney, NSW, Australia.

Medical Physics
|December 25, 2018
PubMed
Abstract

Related Concept Videos

Shear on the Horizontal Face of a Beam Element01:16

Shear on the Horizontal Face of a Beam Element

To understand shear on the flat side of a prismatic beam element, consider the vertical and horizontal shearing forces, and the normal forces, acting on the element. The element's upper (U) and lower (L) sections, which are divided by the beam's neutral axis, are examined. The equilibrium of these forces is determined by applying the equilibrium equation, which helps identify the horizontal shearing force. This force is directly related to the bending moments and the cross-section's...
529
Rotational Motion about a Fixed Axis01:26

Rotational Motion about a Fixed Axis

A rigid body's rotation around a fixed axis makes every point within it trace a circular path around a specific line or point. The term given to this type of spinning is defined by the angular position, symbolized by the angle θ. This angle is gauged from a static reference line to the revolving object. From this angular position, any variation is referred to as angular displacement, denoted by dθ. The extent of this displacement can be calculated in degrees, radians, or...
1.4K
Equation of Motion: Rotation About a Fixed Axis01:18

Equation of Motion: Rotation About a Fixed Axis

Consider a flywheel, having an uneven mass distribution, rotating steadily around a fixed axis. As this rotation occurs, the center of mass of the flywheel traces a circular path. Understanding the acceleration of this center of mass requires observing both its tangential and normal components.
The tangential component is dependent on the direction of the angular acceleration of the flywheel. The tangential component of the acceleration propels the flywheel along its path. On the other hand,...
545
Concepts and Prototypes01:24

Concepts and Prototypes

The human nervous system handles vast amounts of information by translating sensory stimuli into neural impulses, which the brain processes, creating thoughts expressed through language or stored as memories. The brain also synthesizes information from emotions and memories, which significantly influence thoughts and behaviors. This intricate process creates a comprehensive mental picture.
The brain organizes this information using concepts, which are mental categories grouping linguistic data,...
547
Beams01:30

Beams

Beams are integral components of structural engineering and construction, designed to support loads applied at various points along their length. These long, straight members can be classified based on geometry, cross-section, support type, and equilibrium condition.
Based on geometry, beams can be straight, tapered, or curved. Straight beams are the most common type and have a constant cross-section throughout their length. Tapered beams, on the other hand, have a varying cross-section along...
1.9K
Introduction to Horizontal Curves01:19

Introduction to Horizontal Curves

Horizontal curves are essential in highway and railroad design, ensuring smooth and safe transitions between straight path segments, or tangents. These curves allow vehicles to maintain speed without abrupt changes, minimizing accidents and improving travel efficiency.A horizontal curve is typically defined by its geometric relationship to two tangents that meet at an intersection point (P.I.), where a simple curve is introduced to connect them. The back tangent refers to the initial tangent...
682