Fabrication of graphene oxide incorporated polymer monolithic fiber as solid phase microextraction device for...

A novel solid phase microextraction fiber named graphene oxide incorporated poly acrylamide-ethylene glycol dimethacrylate (GO-poly AM-EDGMA) monolithic fiber has been successfully prepared in a fused silica capillary tube (250 μm, i.d.) via thermally initiated polymerization using acrylamide (AM) as the monomer, ethylene glycol dimethacrylate (EGDMA) as the crosslinker, dimethylformamide dispersed by GO as porogens, and then obtained by removing 1 cm wall from one end of the fused silica capillary tube. The fiber has large surface area (536 m² g^-1), pore capacity (0.694 cm³ g^-1) good thermal stability (up to 320 ℃), long service life and good reproducibility (RSD ＜5% throughout 110 times) which facilitated for high throughput headspace solid phase microextraction (HS-SPME) coupled to gas chromatograph (GC) analysis. The HS-SPME/GC method using the new fiber was evaluated by the determination of five organophosphate esters (OPEs) in soil samples coupled to flame photometric detector (FPD). The proposed HS-SPME-GC/FPD method yielded satisfactory limits of quantification (0.03 ng g^-1∼0.24 ng g^-1); linearity (≥0.99), good intra- and inter-day precision expressed as relative standard deviations for a single fiber were in the range of 5.2-9.0% and 4.8-9.0%, respectively, and fiber-to-fiber reproducibility was in the range of 5.9-9.7%. The method was applied for the analysis of OPEs in environmental soil samples and the relative recoveries were found to be in the range from 80.1 to 105.6%. Based on these features, the new fiber has great potential for widespread use as a high throughput trace analysis tool.