Fast response UV detection based on waveguide characteristics of vertically grown ZnO nanorods partially embedded in
Muni Raj Maurya1,2, Vijaykumar Toutam2
1Academy of Scientific and Innovative Research (AcSIR), CSIR-National Physical Laboratory, Dr K. S. Krishnan Marg, New Delhi 110012, India.
Abstract:
Zinc oxide (ZnO)-based ultraviolet (UV) detector has been fabricated and its photoresponse is studied in an out-of-plane contact configuration. Porous anodic aluminum oxide (AAO) template-based deposition method is adopted for the aligned and well-separated growth of ZnO nanorods (NRs). Through-hole in silicon (Si) by modified metal assisted chemical etching is used as a window for the electrochemical deposition of ZnO in the template and for out-of-plane electrical contacts during device analysis. The fabricated photodetector shows a fast response under UV (365 nm) light illumination, with rise and decay times of 31 ± 2 ms and 85 ± 3 ms, respectively. This fast response is analysed in terms of vertical growth and the waveguide nature of ZnO NRs embedded in anodic alumina. These results are further supported by a simulation comparing the electric field distribution of ZnO NR embedded in AAO with that of bare ZnO NR.
Related Concept Videos
DNA as a Genetic Template
DNA as a Genetic Template
Characteristics of Life
Vertical Curve: Problem Solving
Partial Fractions
Introduction to Vertical Curves


