[Data analysis of 8 113 cases of limb deformities corrected by external fixation]

Sihe Qin1, Baofeng Guo2, Shaofeng Jiao3

  • 1Department of Orthopaedics, Rehabilitation Hospital of the National Research Center for Rehabilitation Technical Aids, Beijing, 100176, P.R.China;Department of Orthopaedics, ChuiYangLiu Hospital Affiliated to Tsinghua University, Beijing, 100022, P.R.China.qinsihe@163.com.

Abstract

Related Concept Videos

Distance Corrections01:15

Distance Corrections

To achieve precise distance measurements, especially in surveying and construction, certain corrections must be applied to account for potential sources of error like the standardization errors, temperature variations, and slope adjustments.Standardization error emerges when measurement equipment undergoes changes, such as wear, repairs, or weather impacts. To address this, surveyors compare the equipment’s readings to a standard. This process identifies any deviation that might lead to...
288
Plastic Deformations01:19

Plastic Deformations

Plastic deformation represents a fundamental concept in materials science, which explains the irreversible change in the shape of a material when it experiences stress beyond its elastic capability. This phenomenon is important in structural engineering, especially in designing and analyzing cantilever beams—structures that are securely fixed at one end and bear loads at the opposite end. When these beams are subjected to loads within their elastic range, they will return to their...
461
Plastic Deformations01:14

Plastic Deformations

It is essential to understand how structural members behave under plastic deformation when the bending stress exceeds the material's yield strength. This state of deformation permanently alters the shape of the member, in contrast to the linear elastic behavior observed before yielding. The strain at any point in the member is expressed in terms of maximum strain. Notably, the neutral axis, which coincides with the centroid during elastic bending, shifts away from the centroid under plastic...
438
Analysis of Population Pharmacokinetic Data01:12

Analysis of Population Pharmacokinetic Data

Analysis of population pharmacokinetic data involves studying the behavior of drugs within diverse populations to understand their pharmacokinetic parameters. Traditional pharmacokinetic methods typically involve collecting samples from a few individuals and estimating these parameters. While these methods are commonly used, they have limitations in capturing the variability in drug response among individuals or heterogeneous populations. Population pharmacokinetics is employed to address these...
747
Power Factor Correction01:20

Power Factor Correction

The power transmission to a factory involves the transfer of apparent power, a combination of active and reactive power. The power factor measures how effectively electrical power is converted into useful work output. The ratio of the real power (KW) that does the work to the apparent power (KVA) supplied to the circuit.
537
Work Done on a System by External Force01:11

Work Done on a System by External Force

The work done by an external force on a particle changes its kinetic energy. However, internal forces must also be considered for a system of interacting particles. The potential energy formulation helps formulate the effect of internal forces. The net work done by an external force can be written in terms of the total change of mechanical energy, which includes both kinetic and potential energies.
In the presence of a non-conservative opposing force, like friction, some part of the work done...
3.0K