Efficient nitrogen removal from synthetic domestic wastewater in a novel step-feed three-stage integrated anoxic/oxic
Xin Zhou1, Qi Zhang2, Hailong Sun2
1College of Environmental Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, China; Innovation Center for Postgraduate Education in Municipal Engineering of Shanxi Province, Taiyuan 030024, China; State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, Harbin 150090, China.
Abstract:
In this study, a novel step-feed three-stage integrated anoxic/oxic biological aerated filter (STIAOBAF) process was developed to enhance nitrogen removal from the synthetic domestic wastewater through optimizing influent flow distribution ratio (IFDR) for three stage reactors (R1, R2, R3). Long-term operation demonstrated that the maximum nitrogen removal efficiency was achieved at the IFDR of 30%:50%:20%. The corresponding effluent total nitrogen (TN) was less than 10 mg/L, superior to the first A grade discharge standard of China (Effluent TN < 15 mg/L). The IFDR was further optimized to 32%:49%:19% by response surface methodology (RSM) model, thus obtaining the highest TN removal efficiency of 81.4%. Nitrogen profiles suggested the 2nd stage reactor was the greatest significant contributor for nitrogen removal of the whole system. Microbial community analysis revealed that Chloroflexi, Bacteroidetes, Firmicutes, and Acidobacteria were abundant in anoxic zones, while Planctomycetes, Bacteroidetes and Verrucomicrobia were rich in oxic zones. Nitrogen removal-associated functional bacterial groups (Nitrospira, Thauera, Azospira and Candidatus Kuenenia) were also identified, supporting high-rate nitrogen removal through the combination of anoxic denitrification with aerobic simultaneous nitrification and denitrification (SND). The STIAOBAF will offer a compact and robust alternative for advanced nitrogen removal from the sewage.
Related Concept Videos
Synthetic Biology
Golden rice
Golden rice is a genetically modified...
Steps in the Modeling Process
Attention is the first necessary component for observational learning. It involves focusing on what the model is doing and saying. For example, if you decide to take a drawing class to enhance your skills, you need to pay close attention to the instructor's words and hand movements. The characteristics of the model significantly...
The Nitrogen Cycle
Applications of Integration to Find Blood Flow
Passive Filters
Low-Pass Filters
Low-pass filters are designed to transmit signals with frequencies lower than the cutoff frequency, ωc, and attenuate those above it. The cutoff...
Active Filters


