[Biological Nitrogen Removal Process in a Microbubble-aerated Biofilm Reactor Treating Low C/N Wastewater]

The microbubble-aerated biofilm reactor as a new treatment process combines microbubble aeration technology with aerobic biological treatment. A microbubble aerated biofilm reactor was used in this study to treat low C/N ratio wastewater at a low air/water ratio. The process and performance of biological nitrogen removal were investigated, and the functional bacterial populations for nitrogen removal in the biofilm were analyzed. The results showed that the biological nitrogen removal process was converted from simultaneous nitrification-denitrification to simultaneous partial nitrification, ANAMMOX and denitrification (SNAD) processes when DO concentration was controlled by an air/water ratio of lower than 1:2 and the influent C/N ratio was reduced. As a result, the efficient biological nitrogen removal performance was achieved when treating low C/N ratio wastewater. When the DO concentration was lower than 1.0 mg·L^-1 and the influent C/N ratio was 1:2.8, the SNAD process became dominant for biological nitrogen removal. In this case, the average total nitrogen (TN) removal efficiency was 76.3%, and the average TN loading rate removed was 1.42 kg·(m³·d)^-1. In addition, it was estimated that 86.0% of TN removal was attributed to the ANAMMOX process. The relative abundances of ammonia-oxidizing bacteria populations and ANAMMOX bacteria populations in the biofilm increased gradually, while the relative abundances of nitrite-oxidizing bacteria populations and denitrifying bacteria populations decreased gradually, with a decrease in influent C/N ratio. The variation of functional bacterial populations for nitrogen removal was consistent with the conversion of nitrogen removal process to SNAD process.