Investigating the influence of intermittent and continuous mechanical loading on skin through non-invasive sampling

J F J Soetens1, P R Worsley1, D L Bader1

  • 1Eindhoven University of Technology, Department of Biomedical Engineering, Eindhoven, the Netherlands; Southampton University, Faculty of Health Sciences, Southampton, United Kingdom.

Related Concept Videos

Sampling Continuous Time Signal01:11

Sampling Continuous Time Signal

In signal processing, a continuous-time signal can be sampled using an impulse-train sampling technique, followed by the zero-order hold method. Impulse-train sampling involves the use of a periodic impulse train, which consists of a series of delta functions spaced at regular intervals determined by the sampling period. When a continuous-time signal is multiplied by this impulse train, it generates impulses with amplitudes corresponding to the signal's values at the sampling points.
In the...
743
Mechanical Ventilation II: Invasive Ventilation01:23

Mechanical Ventilation II: Invasive Ventilation

Ventilators are essential medical equipment used to aid patients with respiratory difficulties. Their primary function is to assist or replace spontaneous breathing by providing mechanical ventilation. There are two general classes of mechanical ventilators: negative-pressure and positive-pressure ventilators.
Negative-Pressure Ventilators
Negative-pressure ventilators create a vacuum around the chest or body to draw air into the lungs, simulating breathing. This method does not require an...
751
Continuing Care01:25

Continuing Care

Continuing care describes the variety of health, personal, and social services provided over a prolonged period. The need for continuing care is increasing because people are living longer. Many people do not have families or others to care for them. Continuing care is mainly for patients who are disabled, functionally dependent, or suffering from a terminal disease. It is available within institutional settings or in homes. Examples include nursing centers or facilities, assisted living,...
2.0K
Continuity of a Function01:23

Continuity of a Function

A function is continuous at a point a if three conditions are met: the function is defined at a, the limit of the function as x approaches a exists, and this limit equals the function’s value. Mathematically, this is written asThis definition ensures the graph of the function does not exhibit any breaks, holes, or jumps at that point. Discontinuities occur when any of these conditions fail. A removable discontinuity exists when the two-sided limit exists but the function is either...
240
Continuity Equation01:28

Continuity Equation

The continuity equation asserts that the mass flow rate must remain constant for a steady flow of an incompressible fluid within a confined system. This principle applies to systems where fluid passes through varying cross-sectional areas, such as nozzles, syringes, and pipes.
The mass flow rate is expressed as:
3.3K
Continuity Equation01:20

Continuity Equation

The total amount of current flowing per unit cross-sectional area is called the current density. Hence, the current passing through a cross-sectional area can be written as the surface integral of the current density.
1.5K