Related Experiment Video
Updated: Jan 30, 2026

Fragility Assessment of Bovine Cortical Bone Using Scratch Tests
Published on: November 30, 2017
Estimation of the elastic modulus of child cortical bone specimens via microindentation
Marie Semaan1,2,3, Elie Karam2, Cécile Baron1,3
1a Aix Marseille Univ, CNRS, ISM, Inst Movement Sci , Marseille , France.
Abstract:
Purpose: Non-pathological child cortical bone (NPCCB) studies can provide clinicians with vital information and insights. However, assessing the anisotropic elastic properties of NPCCB remains a challenge for the biomechanical engineering community. For the first time, this paper provides elastic moduli values for NPCCB specimens in two perpendicular directions (longitudinal and transverse) and for two different structural components of bone tissue (osteon and interstitial lamellae). Materials and Methods: Microindentation is one of the reference methods used to measure bone stiffness. Here, 8 adult femurs (mean age 82 ± 8.9 years), 3 child femurs (mean age 13.3 ± 2.1 years), and 16 child fibulae (mean age 10.2 ± 3.9 years) were used to assess the elastic moduli of adult and child bones by microindentation. Results: For adult specimens, the mean moduli measured in this study are 18.1 (2.6) GPa for osteons, 21.3 (2.3) GPa for interstitial lamellae, and 13.8 (1.7) GPa in the transverse direction. For child femur specimens, the mean modulus is 14.1 (0.8) GPa for osteons, lower than that for interstitial lamellae: 15.5 (1.5) GPa. The mean modulus is 11.8 (0.7) GPa in the transverse direction. Child fibula specimens show a higher elastic modulus for interstitial lamellae 15.8 (1.5) than for osteons 13.5 (1.6), with 10.2 (1) GPa in the transverse direction. Conclusion: For the first time, NPCCB elastic modulus values are provided in longitudinal and transverse directions at the microscale level.
More Related Videos
07:56Assessing the Coherence of Parents' Short Narratives Regarding their Child Using the Five-Minute Speech Sample Procedure
Published on: September 19, 2019
09:34A Method to Estimate Cadaveric Femur Cortical Strains During Fracture Testing Using Digital Image Correlation
Published on: September 14, 2017
Related Concept Videos
Strain and Elastic Modulus
Relation between Poisson's ratio, Modulus of Elasticity and Modulus of Rigidity
Dynamic Modulus of Elasticity of Concrete
The sonic test is a common method to determine the dynamic modulus. In this test, a concrete beam, sized either 6 x 6 x 30 inches or 4 x 4 x 20 inches, is clamped at its center. Vibrations are initiated at one end of the beam by an electromagnetic exciter unit powered by a...
Bulk Modulus
Fineness Modulus
Consider performing sieve analysis on sand through a set of ASTM sieves. The weight of aggregate retained in each sieve and pan placed at the bottom is recorded, as given in Column B of Table 1.
To determine the fineness modulus of...
Elasticity
The elasticity of an object can be described by a stress-strain curve, which represents the relationship between stress...