Related Experiment Video
Updated: Jan 30, 2026

Fabrication and Testing of Catalytic Aerogels Prepared Via Rapid Supercritical Extraction
Published on: August 31, 2018
Surfactant-Free Process for the Fabrication of Polyimide Aerogel Microparticles
1Department of Polymer Engineering , The University of Akron , 250 South Forge Street , Akron , Ohio 44325-0301 , United States.
Abstract:
This work focuses on the fabrication of polyimide aerogel microparticles of diameter 200-1000 μm from a surfactant-free, two-phase, silicone oil/dimethylformamide (DMF) oil-in-oil (O/O) system using a simple microfluidic device. The polyimide sol prepared in DMF is turned into droplets suspended in silicone oil in the microfluidic device. The droplets are guided to a heated silicone oil bath to accelerate sol-gel transition and imidization reactions, thereby yielding spherical, discrete gel microparticles that do not undergo coalescence. The discrete gel microparticles are isolated and supercritically dried to obtain aerogel microparticles. The microparticle size distribution shows dependence on dispersed and continuous phase flowrates in the microfluidic channels. The microparticle surface morphology shows dependence on the silicone oil bath temperature.
Related Concept Videos
Parallel Processing
Information Processing Approach
Processes of Self-Presentation
Isothermal Processes
An ideal gas can also undergo isothermal expansion or compression.
For example, consider 1 mole of an ideal gas inside an isolated cylinder at initial volume V...
Work Done in an Adiabatic Process
Precipitation Processes

