Related Experiment Video
Updated: Jan 30, 2026

Scalable Syntheses of Graphene Oxide and Reduced Graphene Oxide using Cascade Design Oxidation and Highly Basic Reduction Reactions
Published on: July 3, 2025
Surface roughness regulation of reduced-graphene oxide/iodine - Based electrodes and their application in polymer
Zahra Fakharan1, Leila Naji1, Khosro Madanipour2
1Department of Chemistry, AmirKabir University of Technology, 424 Hafez Avenue, Tehran P.O Box 15875-4413, Iran.
Abstract:
The current work presents an iodine-mediated fine-tuning method for the electrical and electrochemical properties of reduced-graphene oxide (r-GO)/iodine - based electrodes for application in ITO-free polymer solar cells (PSCs). A multi-technique investigation was applied to correlate the morphological features of GO thin films (GO TFs) with iodine adsorption during the reduction process by HI vapor, electrochemical band gap, Fermi potential, charge carrier mobility and charge density of iodine/r-GO based electrodes. The electrical and electrochemical characteristics of iodine/r-GO electrodes changed considerably by alteration of their surface roughness and iodine content. Iodine/r-GO TFs with the lowest surface roughness and the highest iodine content exhibited the highest charge carrier density and Fermi potential. Electrochemical impedance spectroscopy (EIS) and quantum Hall effect (QHE) results confirmed the p-type conductivity of r-GOs/iodine-based electrodes. PSCs were fabricated using r-GO/iodine electrodes as the photo-anode to follow the influences of iodine content and surface roughness on the photovoltaic performance of the cells. PSCs prepared based on r-GO/iodine electrodes possessing the lowest surface roughness and the highest iodine content provided the lowest charge transfer resistance (Rct) and remarkably higher (∼48%) PCE.
More Related Videos
Related Concept Videos
Redox Titration: Other Oxidizing and Reducing Agents
Standard Electrode Potentials
Polymers
Oxidation Numbers
pH Regulation in Cells
Cytosolic pH
Under physiological conditions, the cytosolic pH is slightly more acidic than the extracellular pH. However, cells must prevent further acidification of their cytosol to...
Cell-surface Signaling

