Related Experiment Video
Updated: Jan 29, 2026

Medium Preparation for the Cultivation of Microorganisms under Strictly Anaerobic/Anoxic Conditions
Published on: August 15, 2019
Operation mode of a step-feed anoxic/oxic process with distribution of carbon source from anaerobic zone on nutrient
Yijun Shen1,2, Dianhai Yang3, Yang Wu2
1State Key Laboratory of Pollution Control and Resource Reuse, College of Environmental Science and Engineering, Tongji University, Shanghai, 200092, P.R. China.
Abstract:
This study investigated the operation mode of a step-feed anoxic/oxic (A/O) process with distribution of the carbon source from the anaerobic zone in terms of the treatment effects on sewage with low carbon and high nitrogen and phosphorus. After seven phases of operation, an optimal flow distribution ratio of 75%:25% was obtained from the anaerobic zone, and the concentrations of chemical oxygen demand, ammonia nitrogen, total nitrogen, and total phosphorous in the effluent were 20.8, 0.64, 14.2, and 0.89 mg/L, respectively. The presence of an internal reflux system in the deaeration zone improved the treatment. 16S rRNA high-throughput sequencing revealed that the microbial communities in aerobic zone I(O1) of the first-step A/O sludge were different from those in aerobic zone I (O2) of the second-step A/O sludge, whereas microbial communities of the seed sludge were similar to those in O2 of the second-step A/O sludge. The richness and diversity of microbial communities in O1 of the first-step A/O sludge samples were higher than those in O2 of the second-step A/O and seed sludge. At the optimal flow distribution ratio, the microbial abundance and treatment removal efficiency were the highest.
More Related Videos
11:43Dissolved Solute Sampling Across an Oxic-Anoxic Soil-Water Interface Using Microdialysis Profilers
Published on: March 24, 2023
12:47Workflow Based on the Combination of Isotopic Tracer Experiments to Investigate Microbial Metabolism of Multiple Nutrient Sources
Published on: January 22, 2018
Related Concept Videos
Modes of Operations of BJT
Active Mode: The most common mode for amplification, the active mode features a forward-biased emitter-base junction and a reverse-biased base-collector junction. This setup enables electrons to be injected from the emitter to the base while blocking the majority carriers at the collector. The...
Steps in the Modeling Process
Attention is the first necessary component for observational learning. It involves focusing on what the model is doing and saying. For example, if you decide to take a drawing class to enhance your skills, you need to pay close attention to the instructor's words and hand movements. The characteristics of the model significantly...
Sources and Properties of Electric Charge
Most atoms additionally constitute another fundamental particle, the neutron. It carries no electrical charge. A...
Hybrid Zones
The Carbon Cycle
Absorption of Nutrients
Enterocytes, which are specialized polar epithelial cells, line the mucosa of the small intestinal walls. These cells...