Related Experiment Video

Updated: Jan 29, 2026

Mesocosm-Scale Constructed Wetland Design for Wastewater Treatment
08:24

Mesocosm-Scale Constructed Wetland Design for Wastewater Treatment

Published on: May 2, 2025

1.0K

Purification of water contaminated with Hg using horizontal subsurface constructed wetlands

Rajendra Prasad Singh1,2, Jiaguo Wu1,2, Dafang Fu3,4

  • 1Department of Municipal Engineering, School of Civil Engineering, Southeast University (SEU), Nanjing, 210096, China.

Environmental Science and Pollution Research International
|February 9, 2019
PubMed

Keywords:
Hg speciesHorizontal subsurface flow constructed wetlandHydraulic retention timePhytoremediationRemoval efficiencymercury remediationwetland water treatmentheavy metal removalconstructed wetlands

More Related Videos

Visualizing Methane-Cycling Microbial Dynamics in Coastal Wetlands07:26

Visualizing Methane-Cycling Microbial Dynamics in Coastal Wetlands

Published on: January 31, 2025

886
Detection and Removal of Nuclease Contamination During Purification of Recombinant Prototype Foamy Virus Integrase07:50

Detection and Removal of Nuclease Contamination During Purification of Recombinant Prototype Foamy Virus Integrase

Published on: December 8, 2017

7.6K

Related Concept Videos

Contaminants and Errors01:16

Contaminants and Errors

Effective sample preparation is crucial for accurate and reliable laboratory analysis. During this process, two significant sources of error can arise: concentration bias from improper sample splitting and contamination caused by methods used to reduce particle size, such as grinding or homogenization. Identifying and minimizing these potential errors is crucial to ensuring the validity of the analysis.
Another key consideration is determining the appropriate number of samples required to...
371
Introduction to Horizontal Curves01:19

Introduction to Horizontal Curves

Horizontal curves are essential in highway and railroad design, ensuring smooth and safe transitions between straight path segments, or tangents. These curves allow vehicles to maintain speed without abrupt changes, minimizing accidents and improving travel efficiency.A horizontal curve is typically defined by its geometric relationship to two tangents that meet at an intersection point (P.I.), where a simple curve is introduced to connect them. The back tangent refers to the initial tangent...
674
Horizontal Curve: Problem Solving01:03

Horizontal Curve: Problem Solving

A horizontal curve is characterized by its radius, intersection angle, and stationing of key points. In this case, the radius is 400 meters, and the angle of intersection is 30 degrees, with the station of the point of curvature (P.C.) at 0 + 150 meters. The goal is to determine the station values at the point of intersection (P.I.), point of tangency (P.T.), and midpoint of the curve, as well as the length of the long chord.The process begins with calculating the tangent distance (T) and the...
376
Horizontal Gene Transfer01:27

Horizontal Gene Transfer

Horizontal gene transfer (HGT) is a process where genetic material moves between organisms within the same generation, unlike vertical gene transfer, which occurs from parent to offspring. HGT plays a crucial role in microbial evolution, adaptation, and survival, particularly in shared environments like the human gut.Mobile genetic elements such as plasmids, prophages, integrons, insertion sequences, and transposons facilitate this process. HGT occurs through three primary mechanisms:...
2.0K
Shear on the Horizontal Face of a Beam Element01:16

Shear on the Horizontal Face of a Beam Element

To understand shear on the flat side of a prismatic beam element, consider the vertical and horizontal shearing forces, and the normal forces, acting on the element. The element's upper (U) and lower (L) sections, which are divided by the beam's neutral axis, are examined. The equilibrium of these forces is determined by applying the equilibrium equation, which helps identify the horizontal shearing force. This force is directly related to the bending moments and the cross-section's...
525
States of Water01:23

States of Water

Water exists in any one of the three classical states: solid (ice), liquid (water), and gas (steam or water vapor). The state of water depends on i) the intermolecular forces that draw molecules together and ii) the kinetic energy that leads to movements that pull them apart.
Water freezes when the intermolecular forces are greater than the kinetic energy. Unlike most other substances, water is less dense in its solid state than in its liquid state. This is because each water molecule can form...
56.8K