Variations in hydrodynamic characteristics of netting panels with various twine materials, knot types, and weave...

It is essential to conduct hydrodynamic experiments for fishing gear at small attack angles along the flow direction to better understand the hydrodynamic characteristics of netting and application of gear. The hydrodynamic characteristics of netting panels made of different materials at small attack angles were investigated by a self-designed setup; this is essential for the effective use of netting on different types of gears. As confirmed by experiments, the measured drag of designed frame without netting accounted for less than 20% of the total setup drag including experimental netting and remained in a steady state under various current speeds and small attack angles, indicating that the self-designed frame setup is suitable for such trials. The drag coefficient was determined by varying the attack angle, solidity ratio, Reynolds number, knot types, weave pattern, and twine materials at small attack angles. The results indicate that the drag coefficient increased as the attack angle increased, but decreased as the solidity ratio and Reynolds number increased. The drag generated by knot accounted for 21% of the total drag of nylon (PA) netting. For braided knotless netting, the drag coefficient of PA netting was about 8.4% lower than that of polythene netting (PE) and 7% lower than that of polyester netting (PES). Compared with twined netting, the braided netting exhibited a higher resistance to flow, corresponding to higher values of drag coefficient.