Related Experiment Video
Updated: Jan 29, 2026

Protocol for Microplastics Sampling on the Sea Surface and Sample Analysis
Published on: December 16, 2016
A new rapid protocol for 226Ra separation and preconcentration in natural water samples using molecular recognition
M Verlinde1, J Gorny1, G Montavon2
1Institut de Radioprotection et de Sûreté Nucléaire (IRSN), PSE-ENV/SEDRE/LELI, 31 Avenue de la Division Leclerc, 92260, Fontenay-aux-Roses, France.
Abstract:
A new rapid protocol for 226Ra separation and preconcentration in natural water samples was developed before its determination by Inductively Coupled Plasma Mass Spectrometry (ICP-MS). For this purpose, the commercially available Ra specific resin AnaLig® Ra-01 was used. This resin shows a high selectivity for radium in a large range of acid concentrations and no affinity or possible elution of 226Ra interfering elements. The distribution coefficients of Ra and other elements over a wide range of acid (HCl and HNO3) concentrations were obtained. Due to the high radium selectivity, the new developed protocol uses only 50 mg of dry resin and its performance was evaluated using 100 mL of three natural waters with different ionic strengths, spiked with a known quantity of 226Ra. Radium was successfully separated and preconcentrated yielding recoveries ranging between 72% and 86%. In parallel with the characterisation of the resin sorption properties, a detailed study of polyatomic interferences was performed on our ICP-MS allowing to identify the prominent elements favouring interferences at m/z = 226. Furthermore, a 226Ra sensitivity comparison between different ICP-MS instruments and configurations was done in order to determine high sensitivity conditions for radium analysis.
Related Concept Videos
States of Water
Water freezes when the intermolecular forces are greater than the kinetic energy. Unlike most other substances, water is less dense in its solid state than in its liquid state. This is because each water molecule can form...
What is Natural Selection?
Nature and Nurture
Sample Preparation for Analysis: Overview
Bulk or large solid samples are typically reduced in size using grinding, crushing, or milling techniques to increase the...
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...
Molecular Shape and Polarity

