Continuous alternative to freeze drying: Manufacturing of cyclodextrin-based reconstitution powder from aqueous...

The aims of this study were to evaluate electrospinning as a continuous alternative to freeze drying in the production of a reconstitution injection dosage form, and to prove that aqueous electrospinning can be realized with a high production rate at room temperature. High-speed electrospinning with a novel continuous cyclone collection was used to manufacture a formulation of the poorly water-soluble antifungal voriconazole (VOR) with sulfobutylether-β-cyclodextrin (SBE-β-CD). The freeze-dried, marketed product of this drug substance, Vfend® also contains SBE-β-CD as excipient. SBE-β-CD acted as a 'quasi-polymer', and it could be electrospun despite its low molecular mass (2163 Da). According to X-ray diffraction and differential scanning calorimetry, no traces of crystalline VOR were detectable in the fibers. Furthermore, Raman mapping and energy dispersive spectroscopy measurements showed a uniform distribution of amorphous VOR in the fibers. Reconstitution tests carried out with ground fibrous powder showed complete dissolution resulting in a clear solution after 30 s (similarly to Vfend®). The high productivity rate (~240 g/h) achieved using high-speed electrospinning makes this scaled-up, continuous and flexible manufacturing process capable of fulfilling the technological and capacity requirements of the pharmaceutical industry. This work shows that aqueous high-speed electrospinning, being a continuous and high-throughput process, is an economically viable production alternative to freeze drying.