Related Experiment Video
Updated: Jan 29, 2026

A Protocol for Electrochemical Evaluations and State of Charge Diagnostics of a Symmetric Organic Redox Flow Battery
Published on: February 13, 2017
Performances of Anion-Exchange Blend Membranes on Vanadium Redox Flow Batteries
Hyeongrae Cho1, Henning M Krieg2, Jochen A Kerres3,4
1Institute of Chemical Process Engineering, University of Stuttgart, 70199 Stuttgart, Germany. hyeongrae.cho@icvt.uni-stuttgart.de.
Abstract:
Anion exchange blend membranes (AEBMs) were prepared for use in Vanadium Redox Flow Batteries (VRFBs). These AEBMs consisted of 3 polymer components. Firstly, PBI-OO (nonfluorinated PBI) or F6-PBI (partially fluorinated PBI) were used as a matrix polymer. The second polymer, a bromomethylated PPO, was quaternized with 1,2,4,5-tetramethylimidazole (TMIm) which provided the anion exchange sites. Thirdly, a partially fluorinated polyether or a non-fluorinated poly (ether sulfone) was used as an ionical cross-linker. While the AEBMs were prepared with different combinations of the blend polymers, the same weight ratios of the three components were used. The AEBMs showed similar membrane properties such as ion exchange capacity, dimensional stability and thermal stability. For the VRFB application, comparable or better energy efficiencies were obtained when using the AEBMs compared to the commercial membranes included in this study, that is, Nafion (cation exchange membrane) and FAP 450 (anion exchange membrane). One of the blend membranes showed no capacity decay during a charge-discharge cycles test for 550 cycles run at 40 mA/cm² indicating superior performance compared to the commercial membranes tested.
Related Concept Videos
Batteries and Fuel Cells
Balancing Redox Equations
Redox Reactions
Redox Reactions
Social Exchange Theory
Gas Exchange and Transport

