Demonstrative operation of four-terminal memristive devices fabricated on reduced TiO₂ single crystals

Resistive switching (RS) was demonstrated in four-terminal planar memristive devices fabricated on reduced TiO₂ (TiO_2-x) single crystal substrates. In the device, a pair of diagonally opposing electrode terminals is used to modify the distribution of oxygen vacancies in the region between another pair of diagonally opposing electrode terminals. This allowed microscopic visual observations of the oxygen vacancy distribution based on electrocoloring. The visual contrast observed in the TiO_2-x reflects the oxygen vacancy concentration in the electrically active zone of the device, which can be modified by application of various external voltages to the electrodes. The current that flows in the device is significantly dependent on the modified oxygen vacancy distribution and the resultant resistance is switchable when the polarization of the applied external voltage is reversed. The crystallographic orientation of the TiO_2-x substrate has a strong influence on the reversible RS phenomenon. Mechanisms behind the voltage-driven resistance change are elaborated with the aid of microscopic analysis for both crystalline and electronic structures in the electrically active zone of the device. Suppression of the formation of irreversible conductive structures comprised of accumulated oxygen vacancies is a key to establishing reversible RS in the device.