Related Experiment Video
Updated: Jan 28, 2026

Analysis of Contact Interfaces for Single GaN Nanowire Devices
Published on: November 15, 2013
ACOG Committee Opinion No. 769 Summary: Reprocessed Single-Use Devices
Abstract:
The reprocessing and reuse of single-use instruments has become increasingly common. Although there are limited data on reprocessed single-use devices, existing studies have found a significant rate of physical defects, performance issues, or improper decontamination. There are currently no data in the medical literature of studies evaluating the cost-effectiveness of reprocessed single-use devices in gynecologic surgery. The use of a reprocessed single-use device provides no direct benefit to an individual patient or her physician. It is the operating surgeon's ethical responsibility to make a good faith effort to know whether reprocessed single-use devices are to be used, and to not use instruments if he or she has concerns about the quality or safety of the instrument(s). Studies on the safety, quality, and cost-effectiveness of reprocessed single-use devices in gynecologic surgery are needed. Physicians should be informed whether the instruments used in surgery are original or reprocessed, and adverse events should be reported to improve the safety information about reprocessed single-use devices. Obstetrician-gynecologists are encouraged to report adverse events and outcomes associated with medical devices to the U.S. Food and Drug Administration's Manufacturer and User Facility Device Experience (MAUDE) database.
Related Concept Videos
5-Number Summary
In a box plot, the minimum and maximum data values represent the lower and upper whiskers in the graph, and the median is designated as the center of the box in the chart. The first quartile and third...
Discharge Summary Forms
Here's a detailed look at the key components and guidelines for preparing a discharge summary:
Non-ohmic Devices
Consider a simple circuit consisting of a battery, a diode, and a resistor. A...
Mnemonic Devices
Acronyms
Acronyms are created by using the initial letters of a series of words to form a new word or phrase. This approach condenses complex information into a single, memorable entity. For example,...
Load along a Single Axis
Consider a beam of length L subjected to a varying load, which is a combination of parabolic and trapezoidal load distribution along the x-axis. In this case, it is essential to determine the resultant loads, their locations, and...
Single Pipe Systems
In a Type I problem, fluid properties (density and viscosity), pipe characteristics (including diameter, length, and surface roughness), and the flow rate or average velocity are...

