Hydrolyzed polyacrylamide biotransformation in an up-flow anaerobic sludge blanket reactor system: key enzymes,...

Hydrolyzed polyacrylamide (HPAM) biotransformation in an up-flow anaerobic sludge blanket reactor including biodegradation performances, biodegradation mechanisms, key enzymes, and functional microorganisms was explored. Response surface methodology was applied to further improve HPAM degradation. The predicted degradation ratios of HPAM and COD_Cr were 46.2% and 83.4% under the optimal conditions. HPAM biodegradation ratio and total organic carbon removal ratio reached 40.5% and 38.9%. Total nitrogen concentration was dramatically decreased with the increasing fermentation time during the fermentation, while low ammonia nitrogen (NH₄⁺-N) and nitrite nitrogen (NO₂^--N) were generated. NH₄⁺-N and NO₂^--N increased slightly on the whole. Enzyme activity change was correlated with HPAM biodegradation. Dehydrogenase activity had a decline of 21.3-41.0%, and the minimum value occurred at 300 mg/L of HPAM. Urease activity was varied from 28.7 to 78.7% and the maximal inhibition ratio occurred at 200 mg/L of HPAM. Mechanisms for the biodegradation of HPAM were also explored by FT-IR, HPLC, and SEM. The results indicated that long-chain HPAM was broken into micromolecule compounds and the amide groups of HPAM were transformed into carboxyl groups. Based on the sequencing results on an Illumina MiSeq platform, Proteobacterias, Bacteroidetes, and Chloroflexi were turned out to be the critical microorganisms involved in HPAM degradation. This work lays a basis for HPAM-containing wastewater treatment and offers a support for water saving and emission reduction. It is of great significance to the sustainable development of oilfield.