Related Experiment Video
Updated: Jan 28, 2026

Chromatographic Fingerprinting by Template Matching for Data Collected by Comprehensive Two-Dimensional Gas Chromatography
Published on: September 2, 2020
Advantages of comprehensive two-dimensional gas chromatography for comprehensive analysis of potential migrants from
Maurus Biedermann1, Koni Grob1
1Official Food Control Authority of the Canton of Zurich (Kantonales Labor), P.O. Box, CH-8032, Zurich, Switzerland.
Abstract:
All substances migrating from food contact materials (FCMs), such as packagings, into food must be safe. This presupposes comprehensive analysis of all constituents potentially reaching a concentration in food that may be of toxicological concern. There is no single technique meeting this task and usually several need to be combined. In many cases, comprehensive two-dimensional gas chromatography (GCxGC) is the best technique available to start with. It provides high resolution and an overview in well-structured plots, grouping similar substances in a manner facilitating identifications. Further, flame ionization detection (FID) enables approximate quantitation without standards, and electron impact (EI) fragmentation in mass spectrometry (MS) provides access to large libraries for identification. GC is limited in amenable molecular mass, but the characterization of the lower mass constituents is usually helpful also for the identification of higher mass ones by techniques like HPLC-MS. The scope of this paper is to advocate the use of GCxGC for comprehensive migrate analysis, based on advantages illustrated by examples.
Related Concept Videos
Gas Chromatography: Introduction
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a...
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
Gas Chromatography: Types of Detectors-II
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
Gas Chromatography: Sample Injection Systems
Two primary injection methods are used...
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall....

