Related Experiment Video
Updated: Jan 28, 2026

Evaluation of Integrated Anaerobic Digestion and Hydrothermal Carbonization for Bioenergy Production
Published on: June 15, 2014
A hydrothermal-carbonization process for simultaneously production of sugars, graphene quantum dots, and porous
Xinyu Chai1, Hui He1, Hanhan Fan1
1College of Light Industry and Food Engineering, Guangxi University, Nanning 530004, PR China; Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, Nanning 530004, PR China.
Abstract:
A green and facile approach was proposed to simultaneously produce fermentative sugar (FS), graphene quantum dots (GQDs), and hierarchical porous carbon (HPC) from sugarcane bagasse through the hydrothermal-carbonization process. In this work, the maximum yields of FS were 35.77%, 30.54%, 1.23%, 28.52%, and 41.85% for xylose, mannose, glucose, galactose, and arabinose, respectively. The GQDs, with bright blue fluorescence, had an average diameter at 2.26 nm, and exhibited a well-defined spherical shape and graphene structure. The formation mechanism of GQDs was further investigated, and the GQDs mainly derived from the dissolved lignin and polysaccharides. Moreover, the HPC presented a much higher surface area and controllable oxygen content than non-hydrothermal pretreatment porous carbon, whose unique pore structure was mainly resulted from the dissolution of FS. The green and facile approach provides a novel pathway to produce high value-added materials from sugarcane bagasse, developing a foundation for the preparation of better biomass materials.
Related Concept Videos
The Carbon Cycle
Carbon Skeletons
Carbonation Shrinkage
The concrete's permeability is slightly reduced as calcium carbonate produced during the reaction fills its pores. Furthermore, its strength is slightly enhanced as the water released during the reaction...
Dot Product
In engineering, the dot product of any two vectors is the product of the magnitudes of the vectors and the cosine of the angle between them. It is denoted by a dot symbol between the two vectors.
Consider a vehicle pulling an object along the ground using a rope. If the rope makes an angle with the horizontal axis, the work done can be calculated using the dot product of the force applied and the object's displacement.
The dot...
Carbon-dioxide Fixation
Scalar Product (Dot Product)
The scalar product of two vectors is obtained by multiplying...

