Related Experiment Video
Updated: Jan 27, 2026

Designing Silk-silk Protein Alloy Materials for Biomedical Applications
Published on: August 13, 2014
Design of InZnSnO Semiconductor Alloys Synthesized by Supercycle Atomic Layer Deposition and Their Rollable
Jiazhen Sheng1, TaeHyun Hong1, DongHee Kang2
1Division of Materials Science and Engineering , Hanyang University , 222, Wangsimni-ro , Seongdong-gu, Seoul 04763 , Republic of Korea.
Abstract:
Amorphous InGaZnO semiconductors have been rapidly developed as active charge-transport materials in thin film transistors (TFTs) because of their cost effectiveness, flexibility, and homogeneous characteristics for large-area applications. Recently, InZnSnO (IZTO) with superior mobility (higher than 20 cm2 V-1 s-1) has been suggested as a promising oxide semiconductor material for high-resolution, large-area displays. However, the electrical and physical characteristics of IZTO have not been fully characterized. In this study, thin IZTO films were grown using a novel atomic layer deposition (ALD) supercycle process consisting of alternating subcycles of single-oxide deposition. By varying the number of deposition subcycles, it was determined that the insertion of a Sn-O cycle improved the mobility and reliability of IZTO-based TFTs. Specifically, the IZTO TFT obtained using one In-O cycle, one Zn-O cycle, and one Sn-O exhibited the best performance (saturation mobility of 27.8 cm2 V-1 s-1 and threshold voltage shift of 1.8 V after applying positive-bias temperature stress conditions). Next, the production of rollable and flexible devices was demonstrated by fabricating ALD-processed IZTO TFTs on polymer substrates. The electrical characteristics of these TFTs were retained without drastic degradation for 240,000 bending cycles. These results indicate that the supercycle ALD technique is effective for synthesizing multicomponent oxide TFTs for electronic applications requiring high mobility and mechanical flexibility.
Related Concept Videos
Semiconductors
Metals such as copper (Cu), zinc (Zn), or lead (Pb) have low resistivity and feature conduction bands that are either not fully occupied or overlap with the valence band, making a bandgap non-existent. This allows electrons in the highest energy levels of the valence band to easily transition to the conduction band upon gaining...
Design Example: Application of Archimedes' Principle
The volume of seawater displaced by the block is determined by first calculating the block's weight. This is done by multiplying the...
Atomic Structure
Atomic Mass
Atomic Orbitals
Types of Semiconductors

