Wastewater biofilm formation on self-assembled monolayer surfaces using elastomeric flow cells

In anaerobic wastewater treatment, microbial biofilm is beneficial for efficient substrate utilization and for preventing the wash-out of key microorganisms. By providing solid supports, biofilm formation can be accelerated due to the early initial adhesion of residing microbes. Alteration in surface properties is therefore one such approach that helps us understand microbial interfacial interaction. Here, self-assembled monolayers of alkanethiols with carboxyl (-COOH), hydroxyl (-OH), and amine (-NH₂) terminal moieties on gold (Au) substrates were employed to study the initial adhesion of wastewater microbes. An elastomeric flow cell was also utilized to simulate the environment of wastewater bioreactor. Results from fluorescence in situ hybridization (FISH) portrayed more enhanced microbial adhesion after 2 h on -NH₂ functional group with the calculated surface coverage of 12.8 ± 2.4% as compared to 7.7 ± 1.6% on -COOH, 11.0 ± 2.0% on -OH, and 1.2% on unmodified Au surfaces. This might be because of concomitant electrostatic attraction between negatively-charged bacteria and positively-charged (-NH₃⁺) functional groups. Nevertheless, the average surface coverage by individual biofilm clusters was 28.0 ± 5.0 μm² and 32.0 ± 9.0 μm² on -NH₂ and -OH surfaces, respectively, while -COOH surfaces resulted in higher value (60.0 ± 5.0 μm²) and no significant cluster formation was observed on Au surfaces. Accordingly, the average inter-cluster distance observed on -NH₂ surfaces was relatively smaller (3.0 ± 0.6 μm) as compared to that on other surfaces. Overall, these data suggest favorable initial biofilm growth on more hydrophilic and positively-charged surfaces. Furthermore, the analysis of the mean fluorescence intensity revealed preferred initial adhesion of key microbes (archaea) on -OH and -NH₂ surfaces. Indeed, results obtained from this study would be beneficial in designing selective biointerfaces for certain biofilm carriers in a typical wastewater bioreactor. Importantly, our elastomeric flow cell integrated with SAM-modified surfaces demonstrated an ideal platform for high-throughput investigation of wastewater biofilm under controlled environments.