Related Experiment Video
Updated: Jan 27, 2026

The Generation of Higher-order Laguerre-Gauss Optical Beams for High-precision Interferometry
Published on: August 12, 2013
Radial sub-aperture coherence method used to achieve beam steering with high precision and stability
Abstract:
Sub-aperture coherence (SAC) algorithm, which is based on the classical phase modulation method called variable period grating (VPG), was usually used to control liquid crystal optical phased arrays (LCOPA) to achieve agile beam steering with high precision. However, the beam steering angle of SAC is severely affected by the beam aperture, which limits the generality of the algorithm distinctly. In this article, two kinds of new phase modulation method have been proposed to solve this problem, which were named as radial sub-aperture coherence (RSAC) and symmetrical radial sub-aperture coherence (SRSAC). By using RSAC, the holistic drift of steering angle, which is caused by the variation of beam aperture, can be effectively avoided. In addition, a series of equidistant steering points with ultra-high precision can be obtained. Upon this basis, SRSAC greatly enhances the steering angle's stability in the presence of system alignment error and relative vibration. Thus, the practicability of LCOPA for beam steering can be improved effectively.
Related Concept Videos
Radial System Protection
In a radial system with a fault downstream of the third breaker, ideally, only the third breaker will open, isolating the fault and interrupting the load connected beyond it. The second breaker has a longer delay setting,...
Beams
Based on geometry, beams can be straight, tapered, or curved. Straight beams are the most common type and have a constant cross-section throughout their length. Tapered beams, on the other hand, have a varying cross-section along...
Nuclear Stability
To hold positively charged protons together...
RNA Stability
Assessment of radial pulse
The radial pulse, located at the wrist, is often the preferred site for assessing peripheral pulse because of its accessibility and dependability. The process of determining the radial pulse involves several steps:
Stability
The stability of an LTI system is determined by the roots of its characteristic equation, known as poles. A system is stable if it produces a bounded...

