Related Experiment Video
Updated: Jan 27, 2026

Combination of Adhesive-tape-based Sampling and Fluorescence in situ Hybridization for Rapid Detection of Salmonella on Fresh Produce
Published on: October 18, 2010
A simple colorimetric probe based on anti-aggregation of AuNPs for rapid and sensitive detection of malathion in
Dongxian Li1, Shun Wang1, Ling Wang1
1College of Mechanical and Electrical Engineering, Henan Agricultural University, Zhengzhou, 450002, China.
Abstract:
In this study, a simple colorimetric probe was developed for rapid and highly sensitive detection of malathion based on gold nanoparticles (AuNPs) anti-aggregation mechanism. A certain amount of NaOH can cause the aggregation of citrate-stabilized AuNPs due to the electrostatic interactions, and the color of AuNP solution changes from wine-red to gray. While in the presence of malathion, malathion is easily hydrolyzed in a strong alkali environment (pH > 9), followed by the production of a mass of negative charges, and thus the aggregated AuNPs turns to well-dispersed and the color of AuNP solution changes from gray to wine-red. This characteristic change can be visualized with the naked eye and quantitatively detected by an ultraviolet-visible (UV-Vis) spectrometer. Under optimized conditions, this probe exhibited a linear response to malathion in the concentration range of 0.05-0.8 μM with a limit of detection (LOD) down to 11.8 nM. The probe also showed good specificity for malathion detection in the presence of other interfering pesticide residues. Furthermore, the probe was successfully employed to detect malathion in environmental samples, with a recovery of 94-107% and a relative standard deviation (RSD) less than 8%. The results demonstrated that the proposed colorimetric probe based on anti-aggregation of AuNPs could be used for quantitative analysis of malathion and provided great potential for malathion determination in environmental samples.
Related Concept Videos
Aggregates Classification
Petrographic classification groups aggregates based on common mineralogical characteristics. Some of the common mineral groups found in aggregates are...
Environmental Applications of Microorganisms
Environmental Influences on Intelligence
Bonding and Strength of Aggregate
Specific Gravity of Aggregate
Bulk or gross specific gravity is calculated by taking the ratio of the mass of aggregates in the saturated surface-dry state to the total volume that includes both the solids and the voids within the...
Bulk Density of Aggregate
Most natural mineral aggregates, like sand and gravel,...

