[Finite element analysis of anterior ring injuries in unstable pelvic fractures treated by different methods]

To compare the biomechanical stability of different fixation methods for anterior ring injury of unstable pelvic fractures, and to provide reference for clinical treatment.

An unstable pelvic fracture model (Tile C) with one side of the sacroiliac joint dislocation and the pubic rami fracture was constructed via three-dimensional finite element analysis. Five different fixation methods were used in the front, and the rear was fixed with sacroiliac screws. The von Mises stress and strain distributions of different combinations of fixation methods were analyzed under mimicking standing conditions.

After being loaded with 500 N vertically, the maximum stress in the anterior fracture was 3.56 MPa in anterior pelvic external fixation (AEF) group, the total displacement and the vertical displacement of the Y axis at the sacroiliac joint and the fracture were not more than 1.5 mm. The maximum stress at fixation, the front of the fracture and sacroiliac joints in the anterior pelvic subcutaneous approach(APA) group and AEF, was significantly higher than anterior modified Stoppa approach(ASA) group, anterior pelvic Ilioinguinal approach (AIA) group, and canulated screw fixation(CSF) group. The total displacement and the vertical displacement of the Y axis at the sacroiliac joint and the fracture in APA group and AEF group were also greater than the other three groups.

Anterior ring injury of unstable pelvic fractures can be significantly improved after the fixation of the implants in the five combined methods. However, overall biomechanical properties of ASA, AIA and CSF group are superior to APA and AEF group.