Related Experiment Video
Updated: Jan 27, 2026
The Microfluidic Probe: Operation and Use for Localized Surface Processing
Published on: June 4, 2009
Prospective Investigation of the Operating Room Time-Out Process
Robert E Freundlich1,2, Catherine M Bulka3, Jonathan P Wanderer1,2
1From the Departments of Anesthesiology.
Background:
Although the surgical pause or time-out is a required part of most hospitals' standard operating procedures, little is known about the quality of execution of the time-out in routine clinical practice. An interactive electronic time-out was implemented to increase surgical team compliance with the time-out procedure and to improve communication among team members in the operating room. We sought to identify nonroutine events that occur during the time-out procedure in the operating room, including distractions and interruptions, deviations from protocol, and the problem-solving strategies used by operating room team members to mitigate them.
Methods:
Direct observations of surgical time-outs were performed on 166 nonemergent surgeries in 2016. For each time-out, the observers recorded compliance with each step, any nonroutine events that may have occurred, and whether any operating room team members were distracted.
Results:
The time-out procedure was performed before the first incision in 100% of cases. An announcement was made to indicate the start of the time-out procedure in 163 of 166 observed surgeries. Most observed time-outs were completed in <1 minute. Most time-outs were completed without interruption (92.8%). The most common reason for an interruption was to verify patient information. Ten time-out procedures were stopped due to a safety concern. At least 1 member of the operating room team was actively distracted in 10.2% of the time-out procedures observed.
Conclusions:
Compliance with preincision time-outs is high at our institution, and nonroutine events are a rare occurrence. It is common for ≥1 member of the operating room team to be actively distracted during time-out procedures, even though most time-outs are completed in under 1 minute. Despite distractions, there were no wrong-site or wrong-person surgeries reported at our hospital during the study period. We conclude that the simple act of performing a preprocedure checklist may be completed quickly, but that distractions are common.
Related Concept Videos
01:17Operational Amplifiers
01:20Vector Operations
A vector multiplied by a scalar value is called scalar multiplication. The result obtained is a new vector with a different magnitude. If the scalar is positive, the direction of the vector remains the same, but if it is negative, the direction of the vector is reversed. For example, the product of the mass and velocity yields the momentum.
01:21Operant Conditioning
Reinforcement in operant conditioning can be positive or negative, both of which serve to increase the likelihood of a behavior. Positive...
01:21Modes of Operations of BJT
Active Mode: The most common mode for amplification, the active mode features a forward-biased emitter-base junction and a reverse-biased base-collector junction. This setup enables electrons to be injected from the emitter to the base while blocking the majority carriers at the collector. The...
01:22Second Derivatives and Laplace Operator
Consider a scalar function. The curl of its...
01:22Basic Operations on Signals
Time Reversal mirrors a continuous-time signal about the vertical axis at t=0. This is achieved by substituting t with −t. For example, if a signal x(t) is considered, the time-reversed signal is x(−t). This operation can be graphically represented, showing the mirrored signal.