Related Experiment Video
Updated: Jan 27, 2026

Nitrogen Compound Characterization in Fuels by Multidimensional Gas Chromatography
Published on: May 15, 2020
Tunable Silver-Containing Stationary Phases for Multidimensional Gas Chromatography
Israel D Souza1, He Nan2, Maria Eugênia C Queiroz1
1Departamento de Química, Faculdade de Filosofia Ciências e Letras de Ribeirão Preto , Universidade de São Paulo , Ribeirão Preto , São Paulo 14040-901 , Brazil.
Abstract:
To achieve high separation power of complex samples using multidimensional gas chromatography (MDGC), the selectivity of the employed stationary phases is crucial. The nonpolar × polar column combination remains the most popular column set used in MDGC. However, resolution of mixtures containing light analytes possessing very similar properties remains a formidable challenge. The development of stationary phases that offer unique separation mechanisms have the potential to significantly improve MDGC separations, particularly in resolving coeluting peaks in complex samples. For the first time, a stationary phase containing silver(I) ions was successfully designed and employed as a second-dimension column using comprehensive two-dimensional gas chromatography (GC × GC) for the separation of mixtures containing alkynes, dienes, terpenes, esters, aldehydes, and ketones. Compared with a widely used nonpolar and polar column set, the silver-based column exhibited superior performance by providing better chromatographic resolution of coeluting compounds. A mixture of unsaturated fatty acids was successfully separated using a GC × GC method in which the elution order in the second dimension was highly dependent on the number of double bonds within the analytes.
More Related Videos
10:14Synthesis and Purification of Iodoaziridines Involving Quantitative Selection of the Optimal Stationary Phase for Chromatography
Published on: May 16, 2014
08:37Measurement of H2S in Crude Oil and Crude Oil Headspace Using Multidimensional Gas Chromatography, Deans Switching and Sulfur-selective Detection
Published on: December 10, 2015
Related Concept Videos
Gas Chromatography: Types of Columns and Stationary Phases
For an analyte to remain on the column for a sufficient amount of time, it must exhibit some level of compatibility (or...
Gas Chromatography: Introduction
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a...
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
Gas Chromatography: Types of Detectors-II
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
Gas Chromatography: Sample Injection Systems
Two primary injection methods are used...