Related Experiment Video
Updated: Jan 27, 2026

Author Spotlight: Optimizing Hollow-Fiber Membranes for Continuous Liquid-Liquid Extraction of Medium-Chain Fatty Acids
Published on: August 9, 2024
Selective production of volatile fatty acids at different pH in an anaerobic membrane bioreactor
Mohd Atiqueuzzaman Khan1, Huu Hao Ngo2, Wenshan Guo1
1Centre for Technology in Water and Wastewater, School of Civil and Environmental Engineering, University of Technology Sydney, Sydney, NWS 2007, Australia.
Abstract:
This study investigated the production of major volatile fatty acid (VFA) components in an anaerobic membrane bioreactor (AnMBR) to treat low-strength synthetic wastewater. No selective inhibition was applied for methane production and solvent-extraction method was used for VFA extraction. The results showed acetic and propionic acid were the predominant VFA components at pH 7.0 and 6.0 with concentrations of 1.444 ± 0.051 and 0.516 ± 0.032 mili-mol/l respectively. At pH 12.0 isobutyric acid was the major VFA component with a highest concentration of 0.712 ± 0.008 mili-mol/l. The highest VFA yield was 48.74 ± 1.5 mg VFA/100 mg CODfeed at pH 7.0. At different pH, AnMBR performance was evaluated in terms of COD, nutrient removal and membrane fouling rate. It was observed that the membrane fouled at a faster rate in both acidic and alkaline pH conditions, the slowest rate in membrane fouling was observed at pH 7.0.
Related Concept Videos
Overview of Fatty Acid Metabolism
Fatty acids are catabolized in a process called beta-oxidation, which takes place in the matrix of the mitochondria and converts their fatty acid chains into two-carbon units of acetyl groups. The acetyl...
Volatilization
Products of the Citric Acid Cycle
What is Natural Selection?
Weak Acid Solutions
Ions as Acids and Bases
Salts are ionic compounds composed of cations and anions, either of which may be capable of undergoing an acid or base ionization reaction with water. Aqueous salt solutions, therefore, may be acidic, basic, or neutral, depending on the relative acid-base strengths of the salt’s constituent ions. For example, dissolving the ammonium chloride in water results in its dissociation, as described by the equation:

