Mesoporous zirconia nanostructures (MZN) for adsorption of As(III) and As(V) from aqueous solutions

Mesoporous zirconia nanostructures (MZN) were synthesized by hydrothermal method to efficiently remove highly mobile and toxic arsenite (As(III)) and arsenate (As(V)) from aqueous solutions. The as-synthesized MZN were characterized by Brunauer-Emmett-Teller (BET), X-Ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscope (HRTEM), and Energy-dispersive X-ray spectroscopy (EDX) techniques. The batch adsorption experimental results showed that the As(III) and As(V) removal capacities of the MZN were 105.03 and 110.29 mg/g, respectively, under neutral pH conditions, which were better than many recently reported adsorbents. The adsorption behavior of As(III) and As(V) on the MZN could be well described by pseudo-second-order and Langmuir isotherms models. Moreover, As(III) and As(V) adsorption on the MZN was spontaneous and endothermic. Some of the common co-existing ions had slightly affected the arsenic removal proficiency of MZN. Fourier transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS) were used to investigate the adsorption mechanism of As(III) and As(V) on the as-synthesized MZN. The as-synthesized MZN demonstrated quite fast and good treatment of simulated real arsenic (As(III,V)) contaminated water. This study suggested that the as-synthesized MZN are potential candidate for practical applications of As(III) and As(V) removal from the aqueous solutions.