Highly Stretchable, Transparent, and Conductive Wood Fabricated by in Situ Photopolymerization with Polymerizable...

The rational design of high-performance, flexible, transparent, electrically conducting sensor attracts considerable attention. However, these designed devices predominantly utilize glass and plastic substrates, which are expensive and not environmentally friendly. Here, novel transparent and conductive woods (TCWs) were fabricated by using renewable wood substrates and low-cost conductive polymers. Polymerizable deep eutectic solvents (PDES), acrylic-acid (AA)/choline chloride (ChCl), were used as backfilling agents and in situ photopolymerized in the delignified wood, which endowed the materials with high transparency (transmittance of 90%), good stretchability (strain up to 80%), and high electrical conductivity (0.16 S m^-1). The retained cellulose orientation and strong interactions between the cellulose-rich template and poly(PDES) endow TCWs with excellent mechanical properties. Moreover, TCWs exhibited excellent sensing behaviors to strain/touch, even at low strain. Therefore, these materials can be used to detect weak pressure such as human being's subtle bending-release activities. This work provides a new route to fabricate functional composite materials and devices which have promising potential for electronics applications in flexible displays, tactile skin sensors, and other fields.