Related Experiment Video
Updated: Jan 27, 2026

Enhanced Oil Recovery using a Combination of Biosurfactants
Published on: June 3, 2022
Biosurfactant Production by Lactic Acid Bacterium Pediococcus dextrinicus SHU1593 Grown on Different Carbon Sources:
Abouzar Ghasemi1, Marzieh Moosavi-Nasab2,3, Payam Setoodeh4
1Department of Food Science and Technology, School of Agriculture, Shiraz University, Shiraz, Iran.
Abstract:
The present study focused on producing and characterizing a type of biosurfactant (BS) derived from lactic acid bacteria (LAB) and its potential applications in pharmaceutical and food industries due to the preference of employing nonpathogenic organisms in bioprocesses. To this aim, several screening approaches were applied to identify an efficient BS-producing strain from a set of LAB, and Pediococcus dextrinicus SHU1593 was selected as the most operative one. The BS produced by P. dextrinicus was isolated and structurally characterized as a lipoprotein with an approximately equal ratio of lipids (~52% (w/w)) and proteins (47% (w/w)). It reduced the surface tension (ST) of phosphate-buffered saline (PBS) from 72.80 ± 0.10 to 39.01 ± 0.32 mN/m. The results also indicated the potential of developing low-cost strategies aimed at the production of efficient LAB-derived BSs which are structurally and quantitatively similar to the ones obtained from conventional media. Finally, given the physical and functional characterization (i.e. critical micelle concentration (CMC), emulsification index (%E24), stability, as well as antimicrobial and anti-adhesive activities) of the BS produced in the present study, it can be introduced as a promising candidate to be employed in plenty of areas in pharmaceutical and food industries.
Related Concept Videos
Products of the Citric Acid Cycle
Scalar Product (Dot Product)
The scalar product of two vectors is obtained by multiplying...
Vector Product (Cross Product)
Consider the cross product of two vectors. Imagine rotating the first vector about...
Bicarbonate-Carbonic Acid Buffer
Wood Products
Glue-laminated wood, often referred to as glulam, combines multiple smaller pieces of dimensional lumber using adhesives to form a single, larger piece. Cross-laminated timber consists...
Dot Product
In engineering, the dot product of any two vectors is the product of the magnitudes of the vectors and the cosine of the angle between them. It is denoted by a dot symbol between the two vectors.
Consider a vehicle pulling an object along the ground using a rope. If the rope makes an angle with the horizontal axis, the work done can be calculated using the dot product of the force applied and the object's displacement.
The dot...

