Related Experiment Video
Updated: Jan 26, 2026

Extraction of High Molecular Weight Genomic DNA from Soils and Sediments
Published on: November 10, 2009
Multi-step column leaching using low-molecular-weight organic acids for remediating vanadium- and
Quan Zou1, Yuchen Gao2, Soyoung Yi2
1School of Environment, Tsinghua University, Beijing, 10084, China. quanzou@mail.tsinghua.edu.cn.
Abstract:
In soil, vanadium (V) contamination is commonly concomitant with chromium (Cr) contamination, which poses potential risks to humans, animals, and plants due to the transfer of toxic metals and the increase in their concentrations via the food chain or through direct exposure. This study applied a multi-step column leaching process using low-molecular-weight organic acids (LMWOAs) to treat V-contaminated soil from a smelter site that contains 2015.1 mg V kg-1 and 1060.3 mg Cr kg-1. After leaching three times with an equivalent solution/soil ratio of 0.3 mL/g using 1.0 M oxalic acid solution, the total removal rates reached 77.2% and 7.2% for V and Cr, respectively, while the removal rates of the extractable fractions reached 118.6% and 99.2% due to the reduction in residual fraction (F4) of toxic metals. Simultaneously, the distribution and redistribution of geochemical fractions of V and Cr were determined with a sequential extraction technique, and the greater proportion of potential mobile fractions of V (65.1%) may increase its leaching from soil relative to Cr (7.1%). In addition, a lower pH of the leaching agent increased the efficiency of the leaching process to an extent. Compared with batch extraction with a typical solution to soil ratio of 10 mL/g, multi-step column leaching used less agent and hence produced less wastewater. This strategy could reduce the mobilization and bioavailability of toxic metals, and potentially enhance in situ soil flushing for the remediation of V- and Cr- contaminated soil.
Related Concept Videos
Molecular Weight of Step-Growth Polymers
As the step-growth polymerization involves step-wise condensation of monomers, the molecular weight also builds up eventually. Consequently, high molecular weight polymers are obtained at the late stages of the polymerization, where 99% of monomers have been consumed.
The extent of the...
Multi-Step Reactions
Polymers: Defining Molecular Weight
The number average molecular weight (Mn) is the summation of the number...
Polymers: Molecular Weight Distribution
Anticoagulant Drugs: Low-Molecular-Weight Heparins
Acid Strength and Molecular Structure
In the absence of any leveling effect, the acid strength of binary compounds of hydrogen with nonmetals (A) increases as the H-A bond strength decreases down a group in the periodic table. For group 17, the order of increasing acidity is HF < HCl < HBr < HI. Likewise, for group 16, the order of increasing acid strength is H2O < H2S < H2Se < H2Te. Across a row in the periodic table, the acid strength of binary hydrogen compounds increases with increasing...

