Self-cleaning of a hydrophobic surface by a rolling water droplet

A water droplet behavior on a hydrophobic surface is examined relevant to the dust particles removal from the surface. Surface crystallization of polycarbonate is realized in acetone bath and the resulting surface is coated by the functionalized nano-size silica particles towards reducing contact angle hysteresis. This arrangement provides droplet rolling/sliding on the hydrophobic surface. Droplet translational velocity is formulated and predictions are compared with those resulted from the high speed recorded data. Influence of surface inclination angle on droplet dynamics is investigated and the dust removal mechanism on the inclined surface is analyzed. It is found that predictions of droplet translational velocity agree well with those obtained from the experiment. Droplet rolling dominates over sliding on the inclined surface and droplet sliding velocity remains almost 10% of the droplet translational velocity. The main mechanism for the dust particles removal is associated with the droplet fluid cloaking of the dust particles during its transition on the hydrophobic surface. Droplet acceleration, due to increased surface inclination angle, has effect on the rate of dust particles removal from the surface, which is more apparent for large droplet volumes. Increasing droplet acceleration improves the coverage area of the clean surface.