Preparation of Crystallites for Oriented Poly(Lactic Acid) Films Using a Casting Method under a Magnetic Field

Poly-l-lactic acid (PLLA) has biocompatibility and unique characteristics such as piezoelectric properties. This attracts attention not only in the environmental field but also in the biomedical and electronic materials fields. In recent years, the literature about orienting PLLA crystals has been promoting new applications for PLLA such as high strength fiberization and piezoelectric properties. This paper presents a new technique to orient the PLLA crystalline through casting under magnetic irradiation. The advantage of this technique is that it is possible to radiate the magnetic field to the PLLA crystalline in an extremely low viscosity environment. Moreover, the heat treatment condition was optimized in order to improve the low crystallinity of casting, and it succeeded in producing a PLLA film with a high degree of orientation and high crystallinity. Furthermore, PLLA/1-butyl-3-methylimidazolium dibutylphosphate (bmimjdbp) composite films were prepared under the same conditions, and this also succeeded in the further improvement of crystallinity.