Related Experiment Video
Updated: Jan 26, 2026

Preparation and Testing of Plant Seed Meal-based Wood Adhesives
Published on: March 5, 2015
A Low-Cost, Formaldehyde-Free and High Flame Retardancy Wood Adhesive from Inorganic Adhesives: Properties and
Shicun Jin1,2,3, Kuang Li4,5,6, Jianzhang Li7,8,9
1Key Laboratory of Wood Materials Science and Utilization (Beijing Forestry University), Ministry of Education, Beijing 100083, China. jinsc1994@bjfu.edu.cn.
Abstract:
Wood composites used in indoor living environments often pose formaldehyde emission and fire hazard problems. In this study, magnesium oxychloride cement-based (MOC) inorganic adhesives are presented as an effective and sustainable binder for plywood applications. The phase composition, microstructure, and thermal stability of the adhesives prepared with different ratios of MgO/MgCl₂ were investigated. In addition, the dry and wet shear strength and the combustion behavior of the plywood were also examined. The results indicated that the limiting oxygen index (LOI) values of the plywood bonded by the MOC adhesives were higher than those of the plywood bonded by urea-formaldehyde resin. The active MgO/MgCl₂ molar ratio of 7 was the optimal ratio for the dry and wet shear strength of the plywood with values of 1.02 and 0.88 MPa, respectively, which meet the interior use panel (Type II plywood) requirements. These improvements were ascribed to the increasing ratio of MgO/MgCl₂ that facilitated the formation of an excellent microstructure. Meanwhile, the continuous hydration phase strengthened the interaction between the MOC adhesive and the wood. With these improved properties, MOC adhesive is expected to be widely used for industrial applications in plywood fabrication.
Related Concept Videos
Adhesion
Capillary action is a result of water’s adhesive tendencies. When a narrow...
Cell Adhesion in Plants
Pectins are complex heteropolymers mainly composed of negatively-charged α-D-glucopyranosyl uronic acid and some neutral glycosyl residues such as α-L-rhamnopyranose, α-L-arabinofuranose,...
Immunoglobulin-like Cell Adhesion Molecules
Ig-CAMs exhibit either homophilic binding (to other Ig-CAMs) or heterophilic binding (to other ligands such as integrins). While most Ig-CAMs...
Intracellular Signaling Affects Focal Adhesions
Some...
Cell Adhesion Molecules - Types and Functions
CAM Families
The Integrin family of proteins is primarily involved...
Laminins are the Adhesive Proteins of Basal Lamina
In humans, the five forms of alpha chains are LAMA 1, LAMA 2, LAMA 3, LAMA 4, and LAMA 5. The four forms of beta chains are LAMB 1, LAMB 2, LAMB 3, and LAMB 4. The three forms of gamma...

