Fabrication and Characteristics of a SOI Three-Axis Acceleration Sensor Based on MEMS Technology

A silicon-on-insulator (SOI) piezoresistive three-axis acceleration sensor, consisting of four L-shaped beams, two intermediate double beams, two masses, and twelve piezoresistors, was presented in this work. To detect the acceleration vector (a_x, a_y, and a_z) along three directions, twelve piezoresistors were designed on four L-shaped beams and two intermediate beams to form three detecting Wheatstone bridges. A sensitive element simulation model was built using ANSYS finite element simulation software to investigate the cross-interference of sensitivity for the proposed sensor. Based on that, the sensor chip was fabricated on a SOI wafer by using microelectromechanical system (MEMS) technology and packaged on a printed circuit board (PCB). At room temperature and V_DD = 5.0 V, the sensitivities of the sensor along x-axis, y-axis, and z-axis were 0.255 mV/g, 0.131 mV/g, and 0.404 mV/g, respectively. The experimental results show that the proposed sensor can realize the detection of acceleration along three directions.