Related Experiment Video
Updated: Jan 26, 2026

Determination of the Settling Rate of Clay/Cyanobacterial Floccules
Published on: June 11, 2018
Photooxidation Behavior of a LDPE/Clay Nanocomposite Monitored through Creep Measurements
Francesco Paolo La Mantia1, Mario Biondo2, Maria Chiara Mistretta3
1Dipartimento di Ingegneria Civile, Ambientale, Aerospaziale, dei Materiali, Università di Palermo, Viale delle Scienze, 90128 Palermo, Italy. francescopaolo.lamantia@unipa.it.
Abstract:
Creep behavior of polymer nanocomposites has not been extensively investigated so far, especially when its effects are combined with those due to photooxidation, which are usually studied in completely independent ways. In this work, the photooxidation behavior of a low density polyethylene/organomodified clay nanocomposite system was monitored by measuring the creep curves obtained while subjecting the sample to the combined action of temperature, tensile stress, and UV radiation. The creep curves of the irradiated samples were found to be lower than those of the non-irradiated ones and progressively diverging, because of the formation of branching and cross-linking due to photooxidation. This was further proved by the decrease of the melt index and the increase of the intrinsic viscosity; at the same time, the formation of carbonyl groups was observed. This behavior was more observable in the nanocomposite sample, because of its faster photooxidation kinetics.
Related Concept Videos
Creep in Concrete
Factors Affecting Creep
Further, the water/cement ratio is critical, as a lower ratio increases concrete strength, thus reducing creep. The strength of the...
Effects of Creep
What is Behavior?
Self-Presentation: Self-Monitoring and Self-Handicapping
Behaviorism
The core premise of behaviorism is its focus on observable behavior rather than internal thoughts or feelings. This approach argues that true scientific...

