Related Experiment Video
Updated: Jan 26, 2026

Surface Properties of Synthesized Nanoporous Carbon and Silica Matrices
Published on: March 27, 2019
Preparation and Characterization of High Surface Area Activated Carbon Fibers from Lignin
Jian Lin1,2, Guangjie Zhao3
1Beijing Key Laboratory of Wood Science and Engineering, Beijing Forestry University, Beijing 100083, China. linjian0702@bjfu.edu.cn.
Abstract:
Activated carbon fibers (ACFs) were successfully prepared from softwood lignin, which was isolated with polyethylene glycol 400 (PEG-400) as a solvolysis reagent, by water steam activation. The pore characterization and adsorption property of ACFs were investigated. The results showed that all the ACFs with more micropores exhibited high specific surface area and total pore volume which increased with the activation time prolonging; the highest ones were around 3100 m²/g and 1.5 mL/g, respectively. The specific surface area and total pore volume were much larger than those of other types of lignin-based ACFs and activated charcoal. Besides, with increasing activation time, the amount of graphitic carbon, which was the main compound on the surface of ACFs, decreased, while the amount of functional groups containing C⁻O slightly increased. In addition, the adsorption capacity of ACFs for methylene blue was highly increased as the activation time increased. Accordingly, lignin isolated with PEG is a promising precursor for ACF production.
Related Concept Videos
The Carbon Cycle
Carbon Skeletons
Classification of Skeletal Muscle Fibers
Slow-Twitch Muscle Fibers
Slow oxidative, muscle fibers appear red due to large numbers of capillaries and high levels of...
Carbonation Shrinkage
The concrete's permeability is slightly reduced as calcium carbonate produced during the reaction fills its pores. Furthermore, its strength is slightly enhanced as the water released during the reaction...
Carbon-dioxide Fixation
Cell-surface Signaling

